Cable bundles are cable management tools that are widely used in all types of industries as well as homes because they are good cable organizers and are used as cable and cable covers. protection. It is a soft bellows that is typically used to bundle cables and cables well and as a cable cover and protector. It has the shape of a tube with a grooved outer surface to provide greater strength and bendability when necessary. It can also be used as a flexible pipe when additional protection is required.
The standard wiring harness has a slot through which the cable is inserted, one side inserted and transported to the other side. They are available in different sizes or can be cut to fit any desired size. To insert cables, cut through slots and cut these industries, you can also use specific tools. Plugging the cable (kabel sleeve) through the slot can also be done easily by hand, but it is recommended to use a tool to insert it effectively. It is also very easy to remove cables and wires from the harness. This is why it is planned to change wiring frequently. Although the slot type is usually used, there are also wiring harnesses without slots that can only be used as a conduit for cable safety.
Looms have unlimited applications anywhere, whether it’s cables for protecting children and pets at home, or complex wiring for car machines such as bicycles and cars. They come in different colors and materials for manufacturing and can be used in almost any environment. In our home, as an example of the most common application, when the cable must pass through the floor, we can cover the cable from any low-level outlet, which can damage it.
These are cables that cannot be permanently hidden, and the wiring diagrams must be changed for any reason, so we can’t think of another way to cover them and protect them, except for bundled cables. When these cable jackets do not interfere with the natural beauty of the area used, a color cable loom can be used, but it can add some aesthetics. In our bathroom we can also find this to be a common accessory, in which the galvanized fabric type is used to protect the water carrying the hose, which adds aesthetics and perfect protection. This can be seen as a shower commonly used in bathtubs or wall showers.
We can see more complex types of cable applications in harnesses or cable assemblies for automotive engines or motorcycles. In automotive engines, the cables (kabel sleeve) are combined so that they are interconnected by clamps, electrical strips and cable harnesses. These cables must be protected from the heat, moisture, wear and vibration of the engine. Optimizing space is an equally important issue in this type of management, and it should be easy to add, replace, or remove any cables if the problem is resolved or fixed.
If we can find out that the wiring management of our cars is so complicated, imagine what the cable management is required for the passenger aircraft. If we can open and open one of the cables, the length can reach several hundred meters. It is very difficult to have all the safety features, protection and troubleshooting/repairing of such components, because the setup time and cable bundle are very useful tools for implementing the complex components of the wiring. All of these harnesses are first created as a complete package, then placed in their original position and equipped with all fire hoods to minimize the risk of short-circuit accidents. All cables are first cut to the desired length, separated from the side of the terminal, made connected, then routed through the casing according to the wiring diagram, and finally the different sleeves are combined and the final shape is provided for this assembly through the sleeve routing or cable bundle.